Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the air filter on the Kymco Xciting S 400i, loosen the screws securing the cover near the rear wheel, on the left side of the bike, and at the top relative to the transmission. Once the bolts are loosened, remove the cover and proceed to unscrew the screws holding the corresponding cover. After these screws are loosened, you can completely pull the filter from its housing, replacing it with a new one and then closing everything with the cover.

Updated on 10 August 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Change the Engine Oil and Oil Filter on a Kymco Xciting S 400i
How to Change the Engine Oil and Oil Filter on a Kymco Xciting S 400i
Xciting S 400i The instructions in this guide will show you how to perform routine maintenance by changing the engine oil and oil filter on the Kymco Xciting S 400i…
How to Change the Engine Oil on Kymco Xciting S 400i?
How to Change the Engine Oil on Kymco Xciting S 400i?
Xciting S 400i To change the engine oil on the Kymco Xciting S 400i, first unscrew the oil drain plug located at the central lower part of the bike: this will allow…
How to Change the Engine Oil on the Kymco Xciting S 400i
How to Change the Engine Oil on the Kymco Xciting S 400i
Xciting S 400i To change the engine oil on the Kymco Xciting S 400i, you need to unscrew the oil drain plug located at the bottom of the bike: this will allow you t…

How to Reset the Service Light on the Yamaha Xmax 250?

To reset the service light on the Yamaha Xmax 250, you need to insert the ignition key into the appropriate slot, so that you can turn it and switch on the instrument panel. Once this is done, press and hold the central button located on the left side of the instrument panel: the button should be held for about 20 seconds. When released, you will notice that the flashing service light has turned off: to verify that the reset has occurred correctly, you will need to switch off and then switch on the vehicle's instrument panel.

Watch the video!


by ScegliAuto

More videos