Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Mt 15
Part: Brake pads

To replace the front brake pads on the Yamaha MT-15, you need to loosen the screws that secure the brake caliper to the corresponding disc: once these screws are loosened, you can detach the caliper and then remove the pin that holds the pads inside. The pads can then be removed in order to insert the new ones: at this point, you will need to reposition the caliper on the disc so that it can be secured with the screws. Once the installation is complete, you can verify that everything is functioning correctly.

Posted on 10 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Yamaha MT-15?
How to Change the Engine Oil in a Yamaha MT-15?
Mt 15 In this tutorial, you will learn how to change the engine oil in a Yamaha MT-15, a very simple and quick operation to perform every 12 months. First,…
How to Change the Engine Oil in the Yamaha MT-15?
How to Change the Engine Oil in the Yamaha MT-15?
Mt 15 In this tutorial, we can see how to change the engine oil in the Yamaha MT-15, a very simple and quick operation. First, wait until the engine is coo…
How to replace the engine oil in the Yamaha MT-15?
How to replace the engine oil in the Yamaha MT-15?
Mt 15 In this tutorial, we can see how to replace the engine oil in the Yamaha MT-15, a very simple and quick operation. First of all, make sure that the e…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos