Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco X Town
Part: Air filter

In this video, we can see how to change the air filter on a Kymco X-Town: you need to remove the panel on the left side of the vehicle, remembering that this operation should be done approximately every 11,000 miles. Remove the cover using a screwdriver and then you can place it on the bench, discovering that the filter is screwed into the cover itself. Replace it and reattach it by screwing it back into its housing, which you then reposition on the right side of the scooter. You can find the filter, for example, on eBay with the code 234933715043 at the price of £12.80, with free delivery.

Posted on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time on a Kymco X-Town Scooter?
How to Set the Time on a Kymco X-Town Scooter?
X Town .. you will see how to set the time on a Kymco X-Town scooter, a very simple and quick operation to perform, for example, after disconnecting the battery.. …
How to Replace the Front Brake Pads on a Kymco X-Town
How to Replace the Front Brake Pads on a Kymco X-Town
X Town .. To replace the front brake pads on a Kymco X-Town, loosen the bolts securing the brake caliper located over the front disc. Once the bolts are loosened,.. …
How to reset the service on the Kymco X-Town 300 scooter?
How to reset the service on the Kymco X-Town 300 scooter?
X Town .. can see how to reset the service on the Kymco X-Town 300 scooter, an extremely simple and quick operation, to be carried out only once all scheduled.. …

How to Replace the Front Headlight Bulb on the Suzuki GS 500?

In this tutorial, you will see how to replace the front headlight bulb on the Suzuki GS 500, a very simple and quick operation. Before proceeding, ensure that the key is not inserted to operate safely. Start by positioning yourself in front of the headlight in question, then locate the two screws at the bottom and unscrew them with a cross-head screwdriver. Next, separate the headlamp from the bracket, disconnect the power connector, and remove the rubber cap. At this point, simply unclip the metal clip, extract the old bulb, and fit the replacement.

Watch the video!


by ScegliAuto

More videos