|
Do it yourself
| |||
| ||||
Model: Kymco X Town
Before you start, position your Kymco X-Town on the centre stand. Begin by removing the front fairing, unscrewing the fixing screws and unclipping the support clips. Next, detach the fairing along with the headlamp, then disconnect the various electrical connectors. You will now have access to the back of the bulb. At this point, unclip and remove the bulb itself, completing the disassembly. To fit the new bulb, follow these steps in reverse, and the replacement will be complete.
Updated on 9 May 2026 by ScegliAuto
Video tutorial
Related tutorials
X Town
.. see how to change the air filter on a Kymco X-Town: you need to remove the panel on the left side of the vehicle, remembering that this operation should.. …
X Town
.. To replace the battery of the Kymco X-Town, loosen the screws located at the front of the front fairing, two on the left and two on the right... …
X Town
.. and replace the drive belt on the Kymco X Town 300 scooter, following the instructions below. First, put the central stand down and start by unscrewing.. …
|
How to Replace the Spark Plug on a Peugeot Django?
You can replace the spark plug on a Peugeot Django by opening the under-seat compartment. Once opened, completely remove the corresponding drawer from its housing. By loosening the screws at the top, you can detach it to access the top of the engine. Here, disconnect the coil from the top of the cylinder, then use a socket wrench to remove the underlying spark plug. Once the old spark plug has been removed, insert the new one, reconnect everything, and check its operation. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.115
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |