Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco X Town
Part: Battery

To replace the battery of the Kymco X-Town, loosen the screws located at the front of the front fairing, two on the left and two on the right. Then, loosen the screws above the footrest compartment, which will also be two on each side. After removing all the indicated screws, you can detach the front fairing and access the battery underneath. The battery will then be extracted from its housing after disconnecting the cables and loosening the bolts that secure it, replacing it with a new one.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Kymco X-Town
How to Replace the Headlight Bulb on a Kymco X-Town
X Town .. Before you start, position your Kymco X-Town on the centre stand. Begin by removing the front fairing, unscrewing the fixing screws and unclipping.. …
How to Replace the Belt on a Kymco X Town 300
How to Replace the Belt on a Kymco X Town 300
X Town .. and replace the drive belt on the Kymco X Town 300 scooter, following the instructions below. First, put the central stand down and start by unscrewing.. …
How to Replace the Front Brake Pads on a Kymco X-Town
How to Replace the Front Brake Pads on a Kymco X-Town
X Town .. To replace the front brake pads on a Kymco X-Town, loosen the bolts securing the brake caliper located over the front disc. Once the bolts are loosened,.. …

How to Replace the Front Headlight Bulb on the Suzuki GS 500?

In this tutorial, you will see how to replace the front headlight bulb on the Suzuki GS 500, a very simple and quick operation. Before proceeding, ensure that the key is not inserted to operate safely. Start by positioning yourself in front of the headlight in question, then locate the two screws at the bottom and unscrew them with a cross-head screwdriver. Next, separate the headlamp from the bracket, disconnect the power connector, and remove the rubber cap. At this point, simply unclip the metal clip, extract the old bulb, and fit the replacement.

Watch the video!


by ScegliAuto

More videos