Do it yourself
Frequently asked questions about cars and motorcycles

Model: Kymco X Town
Part: Brake pads

To replace the front brake pads on a Kymco X-Town, loosen the bolts securing the brake caliper located over the front disc. Once the bolts are loosened, detach the brake caliper and remove the pads inside. After removing the old pads, insert the new ones into their housing, securing them with the corresponding bolt. After installation, activate the front brake to ensure it functions correctly.

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

X Town .. and replace the front brake pads on the Kymco X Town 300 scooter in simple and quick steps. After positioning the scooter on the centre stand, remove.. …
X Town .. Before you start, position your Kymco X-Town on the centre stand. Begin by removing the front fairing, unscrewing the fixing screws and unclipping.. …
X Town .. replace the rear wheel and tyre of the Kymco X Town 300 scooter by following the instructions below. First, place the scooter on the centre stand and.. …

How to Replace the Drive Belt of the Piaggio Vespa 50 ET2

Today, we will discover the instructions that will allow us to dismantle and replace the drive belt of the Piaggio Vespa 50 ET2. First, place the scooter on the stand and start unscrewing all the fixing screws found on the side of the transmission cover to remove it; then unscrew the screw of the fan and the variator, subsequently removing the drive belt, as shown in the video. At this point, install the new toothed belt, as well as the original one, correctly refitting the fan and finally the side cover of the transmission.

Watch the video!


by ScegliAuto

More videos