Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
How do you remove the air filter leading to the engine on an Xciting 400? Follow this guide to proceed with the replacement. Position the scooter on the centre stand, and using a screwdriver, unscrew the screws that secure the air filter container (left side above the casing). After removing the securing screws from the container, uncover the cap and remove the air filter. Install a new one if damaged, or reposition the same filter after cleaning it (blow with air). Finally, close the air filter container and tighten the screws with the screwdriver.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the transmission oil of the Kymco Xciting 400?
How do you replace the transmission oil of the Kymco Xciting 400?
Xciting 400 To perform the oil change of the Kymco Xciting 400 gearbox, you need to loosen the oil drain plug, located at the bottom rear of the transmission cas…
How do you replace the air filter of the Kymco Xciting 400?
How do you replace the air filter of the Kymco Xciting 400?
Xciting 400 In order to replace the air filter of the Kymco Xciting 400, you need to loosen the screws that secure the filter cover, located on the left side of …
How do you replace the brake pads on the Kymco Xciting 400?
How do you replace the brake pads on the Kymco Xciting 400?
Xciting 400 To replace the brake pads of the Kymco Xciting 400, the same procedure must be followed for both the front and rear wheels: you will need to loosen t…

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos