Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the brake pads on the Kymco Xciting 400?

Model: Kymco Xciting 400
Part: Brake pads

Video tutorial

To replace the brake pads of the Kymco Xciting 400, the same procedure must be followed for both the front and rear wheels: you will need to loosen the screws that secure the brake caliper to the corresponding disc so that it can be detached. Then, you can use a tool to pry the pads away from the inside of the caliper after removing the corresponding pin; at this point, the new pads can be inserted into the caliper so that it can be repositioned onto the disc and its operation can be checked.


Posted on 28 January 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on the Kymco Xciting 400
How to Replace the Air Filter on the Kymco Xciting 400
Xciting 400 To replace the air filter on the Kymco Xciting 400, loosen the screws securing the filter cover located on the left side of the bike near the rear wh…
How to Replace the Footrests on the Kymco Xciting 400
Xciting 400 In today's video, see how to replace the original footrests on the Kymco Xciting 400. This operation may be necessary when the footrest covers are wo…
How to Change the Engine Oil of the Kymco Xciting 400?
How to Change the Engine Oil of the Kymco Xciting 400?
Xciting 400 To change the engine oil on the Kymco Xciting 400, unscrew the oil drain plug located at the central lower part of the vehicle. Allow all the used oi…

How to Replace the Headlight Bulb of a Triumph Speed Twin?

To replace the headlight bulb of the Triumph Speed Twin, you need to loosen the screws that secure the headlight unit in place: these screws will be located at the bottom right and bottom left of the headlight unit. Once these are loosened, you can proceed to pull the headlight from its housing and disconnect the connectors inside: the corresponding bulb can now be extracted from inside the headlight unit, allowing you to insert the new one, remounting all the parts you just removed.

Watch the video!


by ScegliAuto

More videos