Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Xciting 400
Part: Clock

In this tutorial, we will see how to set the time on a Kymco Xciting 400 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or after the switch to daylight saving time. First, turn on the instrument panel, then access the odometer "ODO" using the "MODE" button. Press and hold the same button until the clock starts to flash, set the hour using the "ADJ" button and switch to minutes with the "MODE" button. At this point, simply adjust the minutes and save the setting by pressing and holding the "MODE" button again.

Posted on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Service on the Kymco Xciting 400 Scooter?
How to Reset the Oil Service on the Kymco Xciting 400 Scooter?
Xciting 400 In this tutorial, you will see how to reset the oil service on the Kymco Xciting 400 scooter, a very simple and quick operation to perform only after…
How to Set the Clock on the Kymco Xciting 400?
How to Set the Clock on the Kymco Xciting 400?
Xciting 400 To set the clock on the Kymco Xciting 400, turn the ignition key to switch on the instrument panel. Once the panel is on, press and hold the orange b…
How do you replace the air filter of the Kymco Xciting 400?
How do you replace the air filter of the Kymco Xciting 400?
Xciting 400 In order to replace the air filter of the Kymco Xciting 400, you need to loosen the screws that secure the filter cover, located on the left side of …

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos