Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery of the Kymco Agility

Model: Kymco Agility 125
Part: Battery

Video tutorial

Today, you will learn how to replace the battery of the Kymco Agility independently. To replace the battery, open the seat of the scooter to access the battery compartment and remove the cover by unscrewing the four screws.

After removing the battery cover using an Allen key, unscrew the nut of the negative connector and move the cable to prevent it from inadvertently reconnecting. Then, unscrew the nut of the positive connector and remove the battery from its compartment.

Insert the new battery into the compartment and connect the positive connector first, followed by the negative connector; close the battery cover and secure it with the screws. Close the seat of your scooter and start the vehicle to test its operation.


Posted on 8 March 2026 by ScegliAuto


Related tutorials

In the Kymco Agility 125, where are the fuses located?
In the Kymco Agility 125, where are the fuses located?
Agility 125 The Kymco Agility 125 scooter is very similar to the majority of scooters on the market, as it has a battery and fuse arrangement under the footboard…
How to change the battery on the Kymco Agility
How to change the battery on the Kymco Agility
Agility 125 In this video, we will see how to change the battery of the Kymco Agility, regardless of the engine size. The battery is located in the under-seat co…
How to Replace Lambda Sensor on Kymco Agility 125
How to Replace Lambda Sensor on Kymco Agility 125
Agility 125 To replace the lambda sensor on the Kymco Agility 125, open the under-seat compartment to access the underlying components: here you will find the gl…

How to Replace the Air Filter on the Piaggio Beverly 300 iE

To replace the air filter on the Piaggio Beverly 300 iE, you need to loosen the screws that secure the cover of the casing located on the left side of the scooter, just above the transmission casing. Once the cover is removed, you can pull out the air filter from its housing; after the old filter has been removed, insert the new one into its place, covering it with the corresponding casing. After installation, check that everything is functioning correctly.

Watch the video!


by ScegliAuto

More videos