|
Do it yourself
| |||
| ||||
How to Replace the Exhaust on Kymco People 150?
Model: Kymco People 150
Video tutorial
You can replace the exhaust installed on the Kymco People 150 by loosening the screws that secure it to its mounts located near the rear wheel on the right side of the scooter: to complete the removal of the old exhaust, you will also need to loosen the clamp connecting the exhaust to the exhaust manifold. Once the old exhaust has been removed, you can position the new one: secure it to the mounts and connect it to the manifold to verify its operation.
Posted on 9 March 2026 by ScegliAuto
Related tutorials
People 150
To change the engine oil on the Kymco People 150, loosen the drain plug located at the bottom of the transmission casing on the right side of the sco…
People 150
Let’s go through the steps to drain and refill the transmission oil on the Kymco People 150 scooter. First, place the scooter on its centre stand and…
People 150
Today, we will see how to remove and replace the headlight bulb on a Kymco People 150. First, remove the screws found under the handlebars: then also…
|
How to set the clock on a Yamaha V-Star 1300?
To set the clock on a Yamaha V-Star 1300, press and hold the RESET button and the SELECT button upwards, after turning on the ignition by turning the key. Once done, the hours will start to flash, allowing you to adjust them using the arrows above and below the SELECT button. When the correct hours are set, hold the RESET button, and the minutes will start to flash: these can now be adjusted in the same manner, before turning off the ignition. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.037
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |