Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the starter motor on the Kymco Like 125, you will need to loosen the screws securing the corresponding cover located on the right side of the bike. Once the panel is removed, you will be able to locate the starter motor underneath, which must be freed from its fixing screws and the corresponding power cables. At this point, you can remove the old starter motor from its housing to position the new one: connect it and secure it properly to ensure everything functions correctly.

Posted on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the front turn signal bulb on the Kymco Like 125?
How do you replace the front turn signal bulb on the Kymco Like 125?
Like 125 In order to replace the front turn signal light bulb of the Kymco Like 125, you need to reach inside the wheel well of the front wheel: here you will…
Guide to Replacing the Engine Oil on the Kymco Like 125
Guide to Replacing the Engine Oil on the Kymco Like 125
Like 125 In this brief guide, you will find instructions for replacing the engine oil during the regular maintenance service on the Kymco Like 125. First, pos…
How to Replace the Drive Belt on the Kymco Like 125
How to Replace the Drive Belt on the Kymco Like 125
Like 125 Today's steps will show you the procedure for removing and replacing the drive belt on the Kymco Like 125 scooter. First, place the scooter on its ce…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos