Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Engine Oil and Oil Filter on a Kymco People S

Model: Kymco People S 200
Part: Engine oil

Video tutorial

Today, you will learn how to change the engine oil on your Kymco People S. Gather a 17 mm socket spanner, a fixed lever, an extension, a container for used oil, and a 13 mm spanner. First, place the container under the sump and remove the bolt located at the front of the lower part of the sump to drain the oil. Meanwhile, unscrew the oil drain plug.

Once all the oil has drained, refit the 13 mm bolt and then the drain plug. Finally, unscrew the filler cap and add the new oil, completing the job.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

How to Change the Gear Oil on a Kymco People S 200
How to Change the Gear Oil on a Kymco People S 200
People S 200 Let’s go through the guide on how to drain and replace the transmission oil on the Kymco People S 200 scooter, following the instructions below. Firs…
How to Change the Engine Oil on the Kymco People S 200
How to Change the Engine Oil on the Kymco People S 200
People S 200 To change the engine oil on the Kymco People S 200, loosen the oil drain plug located at the bottom of the scooter, just beneath the footrest area. O…
How to Replace the Gear Oil on the Kymco People S 200
How to Replace the Gear Oil on the Kymco People S 200
People S 200 To replace the gear oil on the Kymco People S 200, loosen the screws securing the transmission cover located at the rear of the scooter on the left s…

How to Replace the Water Pump on a Gilera DNA 50

To replace the water pump on a Gilera DNA 50, you must completely disassemble the transmission cover along with the related components inside. On the left side of the cover, near the variator, you will find the water pump under its cover. By removing the screws that secure it from the inside, the old water pump can be taken out of its housing. After removal, insert the new spare part, reassemble the transmission, and all previously removed components.

Watch the video!


by ScegliAuto

More videos