Do it yourself
Frequently asked questions about cars and motorcycles

Model: Kymco Krv 180
Part: Brake pads

You can replace the rear brake pads on the Kymco KRV 180 by loosening the screws that secure the caliper to its housing: once these are removed, you can detach the component completely from its housing to remove the pins that hold the pads. These can now be extracted from their seat to insert the new ones: you can then secure them and reposition the caliper onto the disc. The caliper must now be secured to ensure that the brake functions correctly even after the replacement.

Posted on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Krv 180 In order to replace the engine oil of the Kymco KRV 180, you need to loosen the drain plug located in the central lower part of the vehicle, so that …
Krv 180 To replace the air filter of the Kymco KRV 180, you will need to lift the seat of the motorcycle in order to access the underlying components: under …
Krv 180 In order to replace the battery of the Kymco KRV 180, you need to loosen the screws that secure the front fairing of the motorcycle, located immediat…

How to Replace the Engine Oil and Oil Filter on the Ducati 848

This guide will show you how to perform the routine maintenance service by replacing the engine oil and oil filter on the Ducati 848 motorcycle. First, place your motorcycle on a stand and begin to unscrew the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate spanner to unscrew and remove the oil filter cartridge, replacing it with a new one, as shown in the video. At this point, unscrew the filler cap and top up with the suitable oil!

Watch the video!


by ScegliAuto

More videos