Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Kymco
    3. : Krv 180

Kymco Krv 180 - Video guides

Kymco Krv 180
How to Replace the Rear Brake Pads on a Kymco KRV 180?
You can replace the rear brake pads on the Kymco KRV 180 by loosening the screws that secure the caliper to its housing: once these are removed, you can detach …Read all…
Posted on 9 April 2026 by ScegliAuto
Kymco Krv 180
How do you replace the air filter of the Kymco KRV 180?
To replace the air filter of the Kymco KRV 180, you will need to lift the seat of the motorcycle in order to access the underlying components: under the seat, …Read all…
Posted on 11 October 2025 by ScegliAuto
Kymco Krv 180
How to reset the oil service on the Kymco KRV 180 scooter?
In this tutorial we can see how to reset the oil service on the Kymco KRV 180 scooter, an extremely simple and quick operation, to be carried out only once all …Read all…
Posted on 8 August 2025 by ScegliAuto
Kymco Krv 180
How do you replace the engine oil of the Kymco KRV 180?
In order to replace the engine oil of the Kymco KRV 180, you need to loosen the drain plug located in the central lower part of the vehicle, so that all the …Read all…
Posted on 4 September 2024 by ScegliAuto
Kymco Krv 180
How do you replace the battery of the Kymco KRV 180?
In order to replace the battery of the Kymco KRV 180, you need to loosen the screws that secure the front fairing of the motorcycle, located immediately below …Read all…
Posted on 24 May 2024 by ScegliAuto

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos