Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on the Kymco KRV 180 Scooter?

Model: Kymco Krv 180
Part: Clock

In this tutorial, see how to set the time on the Kymco KRV 180 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or during the change to daylight saving time. First, insert the key, then turn on the instrument panel and reach the "ODO" odometer. Next, press and hold both the "ADJ" button and the "MODE" button until the clock starts flashing. Adjust the hour with the "ADJ" button and switch to minutes with the "MODE" button. Once the minutes are set, save the setting by pressing both buttons again.

Posted on 30 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil service on the Kymco KRV 180 scooter?
How to reset the oil service on the Kymco KRV 180 scooter?
Krv 180 In this tutorial we can see how to reset the oil service on the Kymco KRV 180 scooter, an extremely simple and quick operation, to be carried out onl…
How do you replace the battery of the Kymco KRV 180?
How do you replace the battery of the Kymco KRV 180?
Krv 180 In order to replace the battery of the Kymco KRV 180, you need to loosen the screws that secure the front fairing of the motorcycle, located immediat…
How do you replace the engine oil of the Kymco KRV 180?
How do you replace the engine oil of the Kymco KRV 180?
Krv 180 In order to replace the engine oil of the Kymco KRV 180, you need to loosen the drain plug located in the central lower part of the vehicle, so that …

How to replace the exhaust on a Husaberg FS 570?

To replace the exhaust on the Husaberg FS 570, loosen the screws that secure the side protection panel of the rear mudguard. Once this panel is removed, you will be able to locate the screws that secure the supports positioned near the exhaust. When the screws of these supports are loosened, proceed to widen the connecting clamp that joins the end pipe to the collector; this will allow you to completely remove the old exhaust and insert the new one along with all the removed parts.

Watch the video!


by ScegliAuto

More videos