Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to reset the oil service on the Kymco KRV 180 scooter, an extremely simple and quick operation, to be carried out only once all scheduled maintenance work has been completed. First, insert the key, then turn on the instrument panel, not the engine, and hold down both the "MODE" button and the "ADJ" button. Keep these buttons pressed for the necessary time for the oil change light to disappear from the display, restart the instrument panel and verify that the procedure has been successful.

Posted on 8 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the engine oil of the Kymco KRV 180?
How do you replace the engine oil of the Kymco KRV 180?
Krv 180 In order to replace the engine oil of the Kymco KRV 180, you need to loosen the drain plug located in the central lower part of the vehicle, so that …
How do you replace the battery of the Kymco KRV 180?
How do you replace the battery of the Kymco KRV 180?
Krv 180 In order to replace the battery of the Kymco KRV 180, you need to loosen the screws that secure the front fairing of the motorcycle, located immediat…
How to Replace the Rear Brake Pads on a Kymco KRV 180?
How to Replace the Rear Brake Pads on a Kymco KRV 180?
Krv 180 You can replace the rear brake pads on the Kymco KRV 180 by loosening the screws that secure the caliper to its housing: once these are removed, you …

How to Reset the Service on the Royal Enfield Classic 350?

In this tutorial, you will see how to reset the service on the Royal Enfield Classic 350, a very simple and quick operation. Before proceeding, ensure all scheduled maintenance tasks are completed. Start by inserting the key and turning on the instrument cluster, then navigate to the "Trip 2" mileage using the button on the left knob. Next, turn off the ignition, press and hold the same button for 10 seconds, and while keeping it pressed, turn the ignition back on. At this point, wait for the icon of a spanner to disappear.

Watch the video!


by ScegliAuto

More videos