Do it yourself
Frequently asked questions about cars and motorcycles

Model: Kymco Sky Town
Part: Battery

The following steps will guide you on how to disassemble and replace the battery of the Kymco Agility 125 scooter. First, place the scooter on its stand and start unscrewing the fastening screws of the windscreen to remove it; then remove the front plastic shield by unscrewing the side screws, as shown in the video. At this point, you will have access to the battery, which you will disconnect (positive and negative terminals) to remove it from its compartment, as illustrated in the video. Now, install the new battery in the correct orientation, ensuring it has the same amperage.

Posted on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Sky Town To manually reset the service light on your Kymco Sky Town, simply follow these steps and apply them in the correct order. First of all, turn on the …
Sky Town It will be possible to perform the oil change on the Kymco Sky Town by loosening the drain plug located in the central lower part of the motorcycle: …
Sky Town In this tutorial, you will learn how to change the engine oil on the Kymco Sky Town 150 scooter, a very simple and quick operation. First, ensure tha…

How to Replace the Coolant in the Piaggio Medley 125?

To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant.

Watch the video!


by ScegliAuto

More videos