Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Remove the windscreen from the appropriate screws. Turn the handlebars in both directions to allow access to the lower screws in the fairing that secure the windscreen frame to the fairing. These screws should be removed with an appropriate hex key. Unscrew the four screws located inside the fairing. Proceed to unscrew the two screws in the front fairing where the headlamp is housed, located at the bottom. Unscrew the screws on the upper part of the fairing and remove it. Detach the plastic rectangle inside the fairing and using your fingers, release the clip holding the dashboard. Disconnect everything and unscrew the speedometer cable counterclockwise. Replace the bulb and reassemble everything in reverse order.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Spark Plug on a Kymco People S 125
Replacing the Spark Plug on a Kymco People S 125
People S 125 In this video tutorial, learn how to remove and replace the spark plug on a Kymco People S 125. First, remove the side fairing of the scooter to acce…
How do you disassemble the engine of the Kymco People S 125?
How do you disassemble the engine of the Kymco People S 125?
People S 125 To disassemble the engine of the Kymco People S 125, you need to loosen the screws that hold it to the appropriate supports, then proceed with the re…
How to Replace the Belt on the Kymco People S 125
How to Replace the Belt on the Kymco People S 125
People S 125 To replace the transmission belt on the Kymco People S 125, you need to unscrew the bolts securing the cover near the rear wheel of the scooter, on t…

How to Replace the Front Headlight Bulb on the Suzuki GS 500?

In this tutorial, you will see how to replace the front headlight bulb on the Suzuki GS 500, a very simple and quick operation. Before proceeding, ensure that the key is not inserted to operate safely. Start by positioning yourself in front of the headlight in question, then locate the two screws at the bottom and unscrew them with a cross-head screwdriver. Next, separate the headlamp from the bracket, disconnect the power connector, and remove the rubber cap. At this point, simply unclip the metal clip, extract the old bulb, and fit the replacement.

Watch the video!


by ScegliAuto

More videos