Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This tutorial shows how to change the engine oil in a Kymco Grand Dink 125 scooter, a very simple and quick operation. First, ensure the engine is cool enough for safe operation, then position a container underneath the scooter, locate the drain bolt, and unscrew it using a socket spanner. Allow all the oil in the system to drain out, open the filter cap, and insert the replacement. Finally, reassemble everything and add the necessary amount of oil through the designated top hole.

Posted on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Wheel of the Kymco Grand Dink 125
How to Remove the Rear Wheel of the Kymco Grand Dink 125
Gran Dink 125 To remove the rear wheel of the Kymco Grand Dink 125, you need to unscrew the nut that secures the corresponding axle, located on the right rear side…
How to adjust the clock on the instrument panel of the Kymco New Grand Dink
How to adjust the clock on the instrument panel of the Kymco New Grand Dink
Gran Dink 125 Adjusting the clock on the instrument panel of the Kymco New Grand Dink 125 is a simple and quick operation to be carried out independently. To adjus…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos