Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Gran Dink 125
Part: Wheel

To remove the rear wheel of the Kymco Grand Dink 125, you need to unscrew the nut that secures the corresponding axle, located on the right rear side of the swingarm. Once this nut is loosened, you can unscrew the additional screws securing the disc, allowing you to detach the brake caliper and completely remove the wheel. After the wheel is removed, you can fit the new one by securing the disc screws and tightening the nut on the wheel. This way, you can ensure everything functions correctly.

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Kymco Grand Dink 125 Scooter?
How to Change the Engine Oil in a Kymco Grand Dink 125 Scooter?
Gran Dink 125 This tutorial shows how to change the engine oil in a Kymco Grand Dink 125 scooter, a very simple and quick operation. First, ensure the engine is co…
How to adjust the clock on the instrument panel of the Kymco New Grand Dink
How to adjust the clock on the instrument panel of the Kymco New Grand Dink
Gran Dink 125 Adjusting the clock on the instrument panel of the Kymco New Grand Dink 125 is a simple and quick operation to be carried out independently. To adjus…

How to Replace the Front Brake Pads on a Peugeot Elyseo 125

This guide briefly explains how to remove and replace the front brake pads on the Peugeot Elyseo 125 scooter. First, place your scooter on the centre stand and start unscrewing the bolts securing the front brake caliper to remove it from the disc; then, apply pressure to the caliper piston and clean it from any residual dirt, as shown in the video. At this point, remove and replace the brake pads with new, high-quality ones, installing them in the correct orientation and then refitting the brake caliper!

Watch the video!


by ScegliAuto

More videos