Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Start by unscrewing and removing the screws that secure the front cover of the handlebar. Next, unscrew and remove the bolts that secure the front indicators. Once you have unscrewed everything, you can unclip the front cover surrounding the front headlamp. This will give you access to the bulb housing. Disconnect the rear connector of the bulb, then remove its cover. After removing the cover, you will reach the blown bulb, which you can extract, completing the disassembly. To fit the new bulb and close everything up, simply follow these steps in reverse, and you will have completed the replacement.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Brake Pads on Kymco People S 125
Replacing Front Brake Pads on Kymco People S 125
People 125 Learn how to remove and replace the front brake pads on a Kymco People S 125 scooter in simple, quick steps. First, position the scooter on its centr…
How to Replace the Exhaust on a Kymco People 125
How to Replace the Exhaust on a Kymco People 125
People 125 To replace the exhaust on the Kymco People 125, loosen the screws that secure the old exhaust to the supports. You will also need to loosen the screw…
How to Replace the Ignition Switch on the Kymco People
How to Replace the Ignition Switch on the Kymco People
People 125 In today's video, you will see how to replace the ignition switch on the Kymco People. This video also applies to other models from the manufacturer.…

How to Change the Engine Oil in the Harley-Davidson Iron 883?

In this tutorial, you will learn how to change the engine oil in the Harley-Davidson Iron 883, a very simple and quick operation to perform every 12 months. First, wait for the engine to cool down, then open the filler cap located on the upper right side, disconnect the drain hose, and remove the plug by loosening the corresponding metal clamp. Once all the oil has drained from the system, replace the plug and proceed with changing the filter, which is located on the front of the engine. Finally, add new oil through the filler hole.

Watch the video!


by ScegliAuto

More videos