Do it yourself
Frequently asked questions about cars and motorcycles
To replace the exhaust on the Kymco People 125, loosen the screws that secure the old exhaust to the supports. You will also need to loosen the screw on the clamp that connects the exhaust to the old exhaust pipe. Once the old exhaust is removed, insert the new one, connecting it with the corresponding clamp to the exhaust pipe. Tighten the clamp and then secure the new exhaust to the supports using the screws that were removed earlier.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

People 125 Learn how to remove and replace the front brake pads on a Kymco People S 125 scooter in simple, quick steps. First, position the scooter on its centr…
People 125 To dismantle the fairing of a Kymco People 125, first remove the top box located on the rear rack by inserting the key and pressing the designated bu…
People 125 In today's video, you will see how to replace the ignition switch on the Kymco People. This video also applies to other models from the manufacturer.…

How to Replace the Drive Belt of the Piaggio Vespa 50 ET2

Today, we will discover the instructions that will allow us to dismantle and replace the drive belt of the Piaggio Vespa 50 ET2. First, place the scooter on the stand and start unscrewing all the fixing screws found on the side of the transmission cover to remove it; then unscrew the screw of the fan and the variator, subsequently removing the drive belt, as shown in the video. At this point, install the new toothed belt, as well as the original one, correctly refitting the fan and finally the side cover of the transmission.

Watch the video!


by ScegliAuto

More videos