Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In today's video, you will see how to replace the ignition switch on the Kymco People. This video also applies to other models from the manufacturer. First, you need to purchase an ignition switch, either new or used, from a parts website or physical stores. Once you have that, proceed by opening the front shield of the vehicle and locating the installation area for the component. Carefully remove it, then insert the new component and test its operation. If everything goes well, you can proceed with reassembling the parts and complete your current task.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on a Kymco People 125
How to Replace the Exhaust on a Kymco People 125
People 125 To replace the exhaust on the Kymco People 125, loosen the screws that secure the old exhaust to the supports. You will also need to loosen the screw…
Replacing Front Brake Pads on Kymco People S 125
Replacing Front Brake Pads on Kymco People S 125
People 125 Learn how to remove and replace the front brake pads on a Kymco People S 125 scooter in simple, quick steps. First, position the scooter on its centr…
How to Dismantle the Fairing of a Kymco People 125?
How to Dismantle the Fairing of a Kymco People 125?
People 125 To dismantle the fairing of a Kymco People 125, first remove the top box located on the rear rack by inserting the key and pressing the designated bu…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos