Do it yourself
Frequently asked questions about cars and motorcycles

Basic Service on Kymco Agility 50

Model: Kymco Agility 50
Part: Checks and maintenance

Video tutorial

It is recommended for this model to top up with synthetic oil 10W-40. Start the engine for a few minutes to warm the oil and reduce its viscosity. Once the engine is off, use a 17mm spanner to unscrew the lower drain bolt and collect the used oil in a container.

While the old lubricant drains, unscrew the oil filter and screw in the new one you purchased, as shown in the video. Refit the bolt that acts as a plug for the drain hole and fill with the equivalent amount of oil that came out of the upper hole, using a funnel.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

Agility 50 In the following mini guide, we will discover together how to correctly change the oil of your Kymco Agility 50. First of all, make sure you have the…
Agility 50 Today, we will go through the instructions to change the engine oil and perform the routine maintenance service on the Kymco Agility 50 scooter. Firs…
Agility 50 To replace the rear view mirror on the Kymco Agility, loosen the nut located at the base of the mirror support. Once this nut is loosened, you can ro…

How to Replace the Battery of the Ducati XDiavel S?

To replace the battery of the Ducati XDiavel S, loosen the screws securing the cover panel located at the lower front of the bike, just behind the front wheel: once this panel is removed, you can locate the battery underneath. Release the battery from its housing by unscrewing the screws and disconnecting the power cables; this will allow you to insert the new battery, connecting and securing it properly. Finally, cover everything with the panel and check its operation.

Watch the video!


by ScegliAuto

More videos