Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Agility 125
Part: Wheel

First, stabilise your Kymco Agility scooter in a safe position to work on it securely. Now, proceed to remove the exhaust by unscrewing the two bolts that secure it directly to the engine (below the engine block) and the three small bolts that hold it in place. Next, unscrew the bolts that secure the braking mechanism, then the bolts that secure the support element and the bolt that secures the wheel spindle. Also, remove the shock absorber, and finally, before extracting the wheel, remove the mudguard (unscrewing the appropriate screws, as shown in the images). To fit the new wheel, follow the reverse of the removal procedure.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Pads on a Kymco Agility 125
How to Replace the Rear Brake Pads on a Kymco Agility 125
Agility 125 In today's video, we will see the instructions that will allow us to dismantle and replace the rear brake pads on a Kymco Agility 125 scooter. First,…
How to Change the Engine Oil on the Kymco Agility
How to Change the Engine Oil on the Kymco Agility
Agility 125 Regular maintenance intervals must be followed; let’s see how to change the engine oil on the Kymco Agility scooter, both 125 and 200 models. First, …
How to Remove the Spark Plug from a Kymco Agility 125
How to Remove the Spark Plug from a Kymco Agility 125
Agility 125 Before you start, position your Kymco Agility 125 on the centre stand. Begin by removing the floor panel fairing by unscrewing the fixing screws. Nex…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos