Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Open the seat, remove the small side plastic cover, and disconnect the connector. Unscrew and free the seat lever, then remove the six screws securing the under-seat panel, take it off, and disconnect the connector for the relevant light if applicable (just press the tab and pull it out). At this point, you will see the spark plug: remove its cap and, using the appropriate tool and a screwdriver, unscrew it. Insert the CR7E spark plug and screw it in. Take the appropriate tool and tighten it. Reassemble everything in reverse order: reconnect the connector and fit the seat and under-seat panel.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions to Replace the Spark Plug on the Kymco Downtown 300i
Instructions to Replace the Spark Plug on the Kymco Downtown 300i
Downtown 300i This guide explains how to remove and replace the engine spark plug on a Kymco Downtown 300 injection scooter, following the instructions below. Firs…
How to Check the Coolant Level on the Kymco Downtown 300 Scooter?
How to Check the Coolant Level on the Kymco Downtown 300 Scooter?
Downtown 300i In this tutorial, you will see how to check the coolant level on the Kymco Downtown 300 scooter, a very simple and quick operation to perform periodi…
How do you replace the air filter of the Kymco Downtown 300?
How do you replace the air filter of the Kymco Downtown 300?
Downtown 300i In order to replace the air filter of the Kymco Downtown 300, you need to loosen the screws that secure the panel on the left side of the motorcycle,…

How to Replace the Front Brake Pads on a Peugeot Elyseo 125

This guide briefly explains how to remove and replace the front brake pads on the Peugeot Elyseo 125 scooter. First, place your scooter on the centre stand and start unscrewing the bolts securing the front brake caliper to remove it from the disc; then, apply pressure to the caliper piston and clean it from any residual dirt, as shown in the video. At this point, remove and replace the brake pads with new, high-quality ones, installing them in the correct orientation and then refitting the brake caliper!

Watch the video!


by ScegliAuto

More videos