Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to dismantle the transmission of the Kymco Downtown 300i?

Model: Kymco Downtown 300i
Part: Drivetrain

Video tutorial

To dismantle the transmission of the Kymco Downtown 300i, remove the outer plastic cover by loosening the corresponding bolts. A second inner cover will need to be removed to access the transmission: here you can loosen the nut of the central pin of the variator and slide it out. The same operation should be performed for the clutch: by loosening the nut, you can remove the bell and the internal discs.

After removing the variator and clutch, the belt can be extracted and replaced along with all other removed parts. Once the replacement is complete, you can refit the cover.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to Replace the Drive Belt on the Kymco Downtown 300i
How to Replace the Drive Belt on the Kymco Downtown 300i
Downtown 300i Today's instructions will show you how to remove and replace the drive belt on the Kymco Downtown 300i scooter. First, place the scooter on the centr…
Guide to Dismantling the Variator of the Kymco Downtown 300i
Guide to Dismantling the Variator of the Kymco Downtown 300i
Downtown 300i In this guide, we will see the main instructions on how to dismantle and replace the variator and all the transmission elements of the Kymco Downtown…
How to Replace the Variator and Batteries of the Kymco Downtown 300i
How to Replace the Variator and Batteries of the Kymco Downtown 300i
Downtown 300i Below are the instructions that will allow you to disassemble and replace the rollers and variator of the Kymco Downtown 300i scooter. First, place t…

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos