Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Drive Belt on the Kymco Downtown 300i

Model: Kymco Downtown 300i
Part:

Video tutorial

Today's instructions will show you how to remove and replace the drive belt on the Kymco Downtown 300i scooter. First, place the scooter on the centre stand and start removing the transmission cover by unscrewing all the fixing screws on the sides; then unscrew the central nut of the fan and that of the clutch bell, subsequently removing the V-belt, as shown in the video.

At this point, insert the new belt in the correct orientation, reassembling the transmission components and finally the side cover!


Updated on 29 August 2026 by ScegliAuto


Related tutorials

How to Replace the Variator and Batteries of the Kymco Downtown 300i
How to Replace the Variator and Batteries of the Kymco Downtown 300i
Downtown 300i Below are the instructions that will allow you to disassemble and replace the rollers and variator of the Kymco Downtown 300i scooter. First, place t…
Remove the Clutch and Belt on Kymco Downtown 300i
Remove the Clutch and Belt on Kymco Downtown 300i
Downtown 300i In this video, you will see step-by-step instructions to remove the variator rollers, clutch, and drive belt on a Kymco Downtown 300i scooter. First,…
Guide to Dismantling the Variator of the Kymco Downtown 300i
Guide to Dismantling the Variator of the Kymco Downtown 300i
Downtown 300i In this guide, we will see the main instructions on how to dismantle and replace the variator and all the transmission elements of the Kymco Downtown…

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos