Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Yup50
Part: Air filter

Want to remove the air filter from the Kymco Yup50 scooter? Here’s how to take off the air filter and replace it. Secure the scooter on the centre stand and start removing the air filter. Unscrew the securing screws of the filter housing using a screwdriver. Once the housing is uncovered, pull out the air filter and replace it with a new one. You can also clean the air filter if it is in good condition. Fit the air filter back into the housing, then screw all the securing screws of the cover plastics back in place. Start the engine for a functionality test.

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fuel filter on a Kymco Yup 50
How to replace the fuel filter on a Kymco Yup 50
Yup50 In this short and simple guide, you will learn how to remove and replace the fuel filter on the Kymco Yup 50 scooter, following the instructions belo…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos