Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Yup50
Part: Fuel filter

In this short and simple guide, you will learn how to remove and replace the fuel filter on the Kymco Yup 50 scooter, following the instructions below. First, lift the rider's seat and start unscrewing the screws in the under-seat compartment to remove it; these are located on the sides and inside, then also remove the fuel cap. At this point, you will find the small fuel filter underneath; disconnect it from the hose and replace it with the correct new one. Refit the new fuel filter and then reassemble the under-seat compartment with the seat!

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Air Filter on Kymco Yup50
Removing the Air Filter on Kymco Yup50
Yup50 Want to remove the air filter from the Kymco Yup50 scooter? Here’s how to take off the air filter and replace it. Secure the scooter on the centre st…

How to Replace the Front Bulb on the Honda SH 125

This tutorial explains the steps to replace the front headlamp bulb on the Honda SH 125. This is a very simple procedure. First, remove the front shield of the scooter to access the bulb replacement. To perform this first step, unscrew the lower screw and the two upper screws that secure the cover. At this point, the bulb will be clearly visible. Simply unscrew the bulb and insert a new one. It is recommended to carry out this procedure after ensuring that the bulb to be removed has cooled down.

Watch the video!


by ScegliAuto

More videos