Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the air filter of the Kymco Xciting 500, open the under-seat compartment by turning the appropriate key in the lock. Once the seat is lifted, you can access the components underneath, allowing the cover on the side of the compartment to be removed. This way, the underlying filter can be pulled out from its housing and replaced with a new spare part. Once the new filter is inserted, close the cover and lower the previously lifted seat.

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Belt and Variator from the Kymco Xciting 500
Removing the Belt and Variator from the Kymco Xciting 500
Xciting 500 This guide provides the main instructions for removing and replacing the belt and variator of the Kymco Xciting 500 scooter. First, place the scooter…
How to Replace the Belt on a Kymco Xciting 500
How to Replace the Belt on a Kymco Xciting 500
Xciting 500 Below are the steps to remove and replace the drive belt on the Kymco Xciting 500 scooter, in simple and quick steps. First, place the scooter on its…
How to Change the Engine Oil on a Kymco Xciting 500 Scooter?
How to Change the Engine Oil on a Kymco Xciting 500 Scooter?
Xciting 500 In this tutorial, learn how to change the engine oil on a Kymco Xciting 500 scooter. This operation is extremely simple and quick. First, ensure the …

How to change the engine oil on a Sym Elite 50?

To change the engine oil on a Sym Elite 50, start by placing the scooter on a flat surface and ensure the engine is warm, not hot. Locate the oil drain plug on the engine and position a collection container underneath it. Unscrew the drain plug and let the used oil flow into the container. Once the drainage is complete, re-tighten the drain plug. Next, locate the oil filler cap on the engine and remove it. Use a funnel to pour new oil into the tank, being careful not to exceed the recommended level. Once the new oil is added, re-tighten the filler cap. Ensure both caps are securely fastened. Start the scooter for a few minutes to allow the oil to circulate in the engine. Finally, turn off the scooter, and you will have completed the oil change.

Watch the video!


by ScegliAuto

More videos