Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, learn how to change the engine oil on a Kymco Xciting 500 scooter. This operation is extremely simple and quick. First, ensure the engine is cool enough to operate safely, then place a container underneath the scooter, locate the drain bolt, and unscrew it using a 17mm socket wrench. Allow all the oil in the system to drain out, then remove the secondary filter and clean it of any dirt residue. At this point, unscrew the main filter, tighten the replacement, reassemble everything, and pour the necessary amount of oil through the designated upper hole.

Posted on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plug on the Kymco Xciting 500
How to Replace the Spark Plug on the Kymco Xciting 500
Xciting 500 Follow this guide for instructions on how to remove and replace the spark plug on the Kymco Xciting 500 scooter by following these simple steps. Firs…
Removing the Belt and Variator from the Kymco Xciting 500
Removing the Belt and Variator from the Kymco Xciting 500
Xciting 500 This guide provides the main instructions for removing and replacing the belt and variator of the Kymco Xciting 500 scooter. First, place the scooter…
How to Replace the Belt on a Kymco Xciting 500
How to Replace the Belt on a Kymco Xciting 500
Xciting 500 Below are the steps to remove and replace the drive belt on the Kymco Xciting 500 scooter, in simple and quick steps. First, place the scooter on its…

How to Replace the Engine Oil in the KTM Duke 390?

As you can see in this tutorial, replacing the engine oil in the KTM Duke 390 is a very simple and quick task. Before proceeding, wait until the engine is completely cold to work safely. Start by placing a container underneath the bike, then locate the drain plug on the lower left side and unscrew it with a socket wrench. Once all the oil contained in the engine has drained out, open the filter housing cap, replace the filter, and reassemble everything. Finally, insert new oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos