Do it yourself
Frequently asked questions about cars and motorcycles
Follow this guide for instructions on how to remove and replace the spark plug on the Kymco Xciting 500 scooter by following these simple steps. First, place your scooter on the centre stand and start by removing the plastic cover on the floorboard; then disconnect the spark plug cap or connector and use a socket spanner to unscrew and remove the spark plug, as shown in the video. At this point, install the new spark plug with the same thread pitch; then screw it in by hand before tightening it with the spanner!

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Xciting 500 To replace the air filter of the Kymco Xciting 500, open the under-seat compartment by turning the appropriate key in the lock. Once the seat is lift…
Xciting 500 To replace the battery of the Kymco Xciting 500, lift the seat to access the under-seat compartment. At the rear of this compartment, you will find a…
Xciting 500 In this video, the repair manual for the Kymco Xciting 250-500 is presented. This essential workshop document contains general technical specificatio…

How to Replace the Air Filter on a Honda CB500X?

Replacing the air filter on the Honda CB500X, as shown in this tutorial, is a very simple and quick operation. First, remove the seat, then loosen the nut securing the negative terminal of the battery, disconnect it, and repeat the process for the positive terminal. Next, detach the upper strap, remove the battery, and unscrew the 4 screws securing the airbox cover. Once opened, you can extract the old filter, remove any residue present in the housing, and fit the new part.

Watch the video!


by ScegliAuto

More videos