Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Kymco Super 8 125

Model: Kymco Super 8 125
Part: Air filter

Video tutorial

To replace the air filter on a Kymco Super 8 125, loosen the screws securing the cover on the left side of the bike, near the rear wheel and above the transmission casing. Once the screws are loosened, remove the cover and then unscrew the screws holding the filter in place.

The filter can now be removed from its housing and replaced with a new part. After securing the new filter, refit the cover and fasten it with the appropriate bolts.


Updated on 13 May 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Kymco Super 8 125
How to Replace the Air Filter on a Kymco Super 8 125
Super 8 125 Before you start, position your Kymco Super 8 125 on the centre stand. First, unscrew and remove the screws securing the air filter cover. Next, dise…
How to Replace the Air Filter on the Kymco Super 8 125
How to Replace the Air Filter on the Kymco Super 8 125
Super 8 125 This guide provides instructions for removing and replacing the air filter of the engine on the Kymco Super 8 125 scooter, as well as the 150. First,…
How to Replace the Fuel Filter on the Kymco Super 8 125
How to Replace the Fuel Filter on the Kymco Super 8 125
Super 8 125 In this brief and simple guide, you will find the main instructions on how to remove and replace the fuel filter on the Kymco Super 8 125 scooter. Fi…

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos