Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide provides instructions for removing and replacing the air filter of the engine on the Kymco Super 8 125 scooter, as well as the 150. First, place your scooter on the centre stand and start unscrewing the screws securing the air filter box; once the cover is removed, extract and replace the filter cartridge with a new one, as shown in the video. Now install the new air filter, ensuring it is inserted the correct way; reassemble the air filter box, following the video tutorial to the end!

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Kymco Super 8 125
How to Replace the Air Filter on a Kymco Super 8 125
Super 8 125 Before you start, position your Kymco Super 8 125 on the centre stand. First, unscrew and remove the screws securing the air filter cover. Next, dise…
How to Replace the Air Filter on a Kymco Super 8 125
How to Replace the Air Filter on a Kymco Super 8 125
Super 8 125 To replace the air filter on a Kymco Super 8 125, loosen the screws securing the cover on the left side of the bike, near the rear wheel and above th…
How to Replace the Fuel Filter on the Kymco Super 8 125
How to Replace the Fuel Filter on the Kymco Super 8 125
Super 8 125 In this brief and simple guide, you will find the main instructions on how to remove and replace the fuel filter on the Kymco Super 8 125 scooter. Fi…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos