Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on the Kymco Super 8 125

Model: Kymco Super 8 125
Part: Fuel filter

Video tutorial

In this brief and simple guide, you will find the main instructions on how to remove and replace the fuel filter on the Kymco Super 8 125 scooter. First, place the scooter on the centre stand and lift the seat; then locate the small fuel filter by disconnecting both the inlet and outlet hoses to remove it and replace it with a new one, as shown in the video.

At this point, install the appropriate fuel filter; finally, reassemble the under-seat compartment to close the seat, then start the engine!


Updated on 1 September 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Kymco Super 8 125
How to Replace the Air Filter on a Kymco Super 8 125
Super 8 125 Before you start, position your Kymco Super 8 125 on the centre stand. First, unscrew and remove the screws securing the air filter cover. Next, dise…
How to Replace the Air Filter on the Kymco Super 8 125
How to Replace the Air Filter on the Kymco Super 8 125
Super 8 125 This guide provides instructions for removing and replacing the air filter of the engine on the Kymco Super 8 125 scooter, as well as the 150. First,…
How to Replace the Air Filter on a Kymco Super 8 125
How to Replace the Air Filter on a Kymco Super 8 125
Super 8 125 To replace the air filter on a Kymco Super 8 125, loosen the screws securing the cover on the left side of the bike, near the rear wheel and above th…

How to Change the Engine Oil in a Honda Dio Scooter?

In this tutorial, see how to change the engine oil in a Honda Dio scooter, a very simple and quick operation to perform every 12 months. First, ensure the engine is cool enough to work safely, then position a container underneath the scooter, locate the drain bolt, and loosen it using a socket spanner. Allow all the oil in the system to drain out, then tighten the bolt after applying a new washer and pour in the required amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos