Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco K Pipe
Part: Battery

In today's video tutorial, find the instructions to remove and replace the battery of the Kymco K-pipe motorcycle. First, place the stand on your motorcycle and start by removing the seat of the rider and passenger; then you will find the battery underneath, as shown in the video. At this point, use a 10 mm socket spanner to unscrew the bolts of the terminals (positive and negative) to disconnect it; simply remove it and replace it with a new one of the same size and amperage as the original!

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you disassemble the engine of the Kymco K-Pipe?
How do you disassemble the engine of the Kymco K-Pipe?
K Pipe .. order to disassemble the engine of the Kymco K-Pipe, you need to unscrew the fixing screws of the cylinder on the top of the engine block, so that this.. …
How to Replace the Engine Oil of the Kymco K-Pipe
How to Replace the Engine Oil of the Kymco K-Pipe
K Pipe .. To replace the engine oil of the Kymco K-Pipe, loosen the screw that secures the drain plug at the central lower part of the bike: once the plug.. …

How to Reset the Oil Light on a Honda PCX 160

In this mini guide, discover the steps to manually reset the oil light on the central display of your Honda PCX 160. First, turn on the ignition with the key and press both the 'Sel' and 'Set' buttons located below it simultaneously. When the time starts to flash, hold 'Sel' until the oil indicator flashes, then press the 'Set' button once. To complete the reset, hold 'Sel' again until the operation is finished.

Watch the video!


by ScegliAuto

More videos