Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Like 125
Part: Battery

This guide will show you how to remove and replace the battery of the Kymco Like 125 scooter. First, place your scooter on the centre stand and open the seat; then remove the cover found in the under-seat compartment to access the battery, as shown in the video. At this point, disconnect both battery terminals (positive and negative) and remove the battery from its compartment; then install the new battery of the correct type and with the same amperage, connect it, and test the engine ignition!

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear wheel of the Kymco Like 125
How to replace the rear wheel of the Kymco Like 125
Like 125 In this new guide dedicated to all of you who own a Kymco Like 125, we will explain how to correctly replace the rear wheel. First of all, make sure …
How to Replace the Drive Belt on the Kymco Like 125
How to Replace the Drive Belt on the Kymco Like 125
Like 125 Today's steps will show you the procedure for removing and replacing the drive belt on the Kymco Like 125 scooter. First, place the scooter on its ce…
How do you replace the front turn signal bulb on the Kymco Like 125?
How do you replace the front turn signal bulb on the Kymco Like 125?
Like 125 In order to replace the front turn signal light bulb of the Kymco Like 125, you need to reach inside the wheel well of the front wheel: here you will…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos