Do it yourself
| ||||
|
Model: Kymco Xciting S 400i
In order to replace the rear brake pads of the Kymco Xciting S 400i, you need to loosen the bolt that secures the brake caliper to the corresponding disc, so that it can be removed from its housing. After the caliper has been detached from the disc, it will be possible to remove the pads that are inside it, also removing the corresponding locking pin. Once the old pads have been removed, it will be possible to insert the new ones inside the caliper, securing them with the pin and reinstalling the caliper on the appropriate disc.
Posted on 12 May 2023 by ScegliAuto
|
How do you replace the fork of the Beta Xtrainer?The replacement of the Beta Xtrainer fork is done by loosening the screws that fix the front wheel to its housing: the screws will be located on the sides of the lower part of the fork. Furthermore, it will be necessary to unscrew the screws that fix the front brake caliper, so that it is removed from the disc. Now it will be possible to proceed by removing the wheel so that the fork is released: the fork must in turn be detached from its housing by loosening the screws on the upper part and removing the clamps corresponding to the fender. By doing so, it will be possible to insert the new fork and assemble all the removed parts. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |