![]() |
Do it yourself
| |||
|
Model: Kymco People Gt 300i
Today's guide will show us the process of how to dismantle and replace the drive belt and variator rollers of the Kymco People GT 300i scooter. First, we place the scooter on the center stand and begin to unscrew the fastening screws of the transmission casing, in order to remove it. Then, we unscrew the fan nut and clutch bell nut, removing the components as shown in the video. At this point, we remove the drive belt and then the variator, replacing the rollers found inside. Finally, we reassemble our transmission and casing!
Posted on 9 June 2023 by ScegliAuto
|
How to change the motor oil of a Harley Davidson Shovelhead?![]() To change the oil of a Harley Davidson Shovelhead, start by warming up the engine for a few minutes to make the oil more fluid and facilitate drainage. Park the motorcycle on a flat and stable surface and turn off the engine. Place a container for collecting the oil under the drain plug of the crankcase. Use a wrench to loosen the drain plug and let the old oil drain completely. Once the oil has drained, clean the drain plug and washer, then put the plug back in place and tighten it carefully. Remove the oil tank cap and use a funnel to slowly pour the new oil into the tank, making sure to use the type and quantity specified in the owner's manual. After adding the oil, replace the oil tank cap and start the engine for a few minutes to circulate the new oil. Turn off the engine and check the oil level, adding more if necessary. Check for any leaks around the drain plug before resuming riding. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |