Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Ak 550
Part: Brake pads

In this tutorial, you will see how to replace the rear brake pads on the Kymco AK 550 scooter, a very simple and quick operation. First, position yourself in front of the brake in question, then loosen the lower bolt using an 8mm hex key, and with a 14mm socket, unscrew the two mounting bolts of the caliper. Next, separate the caliper from the frame, remove the previously loosened pin, and take out the old pads. At this point, clean any dirt residue, fit the new parts, and reassemble everything.

Updated on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rear brake pads of the Kymco AK 550?
How do you replace the rear brake pads of the Kymco AK 550?
Ak 550 In order to replace the rear brake pads of the Kymco AK 550, you need to loosen the screws that secure the brake caliper to its housing, so that you …
How to Change the Engine Oil on the Kymco AK 550 Scooter?
How to Change the Engine Oil on the Kymco AK 550 Scooter?
Ak 550 In this tutorial, we will see how to change the engine oil on the Kymco AK 550 scooter, a very simple and quick operation. First, ensure that the eng…
How to Replace the Front Brake Pads on the Kymco AK 550?
How to Replace the Front Brake Pads on the Kymco AK 550?
Ak 550 To replace the front brake pads on the Kymco AK 550, loosen the central pin that secures the pads inside the caliper. Use a socket spanner to remove …

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos