Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video, you will see how to switch the setting from km/h to mph (and vice versa) on the Kymco Super 8 1250 and 150: you need to operate the "mode" button located on the left side to select the distance travelled so far, regardless of whether it is recorded in miles or kilometres; then press the adjust button on the right side of the dashboard, holding it for two seconds, and you will see the value change from km to miles and vice versa. This way, you can change the value as often as you like without affecting the distance travelled.

Updated on 8 September 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to change the gear oil of the Kymco Super 8 125
How to change the gear oil of the Kymco Super 8 125
Super 8 125 Today's procedure will show us how to change the transmission oil of the Kymco Super 8 125 scooter. First of all, we put the scooter on the center st…
How to Replace the Air Filter on a Kymco Super 8 125
How to Replace the Air Filter on a Kymco Super 8 125
Super 8 125 Before you start, position your Kymco Super 8 125 on the centre stand. First, unscrew and remove the screws securing the air filter cover. Next, dise…
How do you replace the rearview mirrors of the Kymco Super 8 125?
How do you replace the rearview mirrors of the Kymco Super 8 125?
Super 8 125 In order to replace the rearview mirrors of the Kymco Super 8 125, you need to loosen the screws that secure these elements to their housing: the scr…

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos