Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Lamborghini Urus - Videoguide

Lamborghini Urus (2018-2024 / MK 1)
Replacement of the Lamborghini Urus engine oil and oil filter.
We will briefly see the useful instructions that will allow us to carry out the routine maintenance of the oil change and oil filter of the Lamborghini Urus. …read all…
Posted on 5 March 2024 by ScegliAuto
Lamborghini Urus (2018-2024 / MK 1)
Impossible things already included in the Lamborghini Urus.
Since it is not even remotely possible to think about installing an aftermarket accessory on a car like the Lamborghini Urus, we will show you some truly …read all…
Posted on 24 July 2023 by ScegliAuto
Lamborghini Urus (2018-2024 / MK 1)
How to reset the oil light on the Lamborghini Urus.
Today we will explain how to reset the oil light on a Lamborghini Urus. The reset should only be performed if you have replaced the oil and filter. We will …read all…
Posted on 24 July 2023 by ScegliAuto
Lamborghini Urus (2018-2024 / MK 1)
How to reset the oil change inspection light on a Lamborghini Urus.
In this video tutorial, we can see how it is possible to reset the engine oil change inspection light in a Lamborghini Urus. It is very important for this type …read all…
Posted on 3 July 2023 by ScegliAuto
Lamborghini Urus (2018-2024 / MK 1)
How to replace the remote control battery of the Lamborghini Urus
Let's see in today's video how to replace the exhausted battery of the Lamborghini Urus key. We can immediately see how it is very similar to the Audi one. We …read all…
Posted on 16 November 2022 by ScegliAuto
Key (1) -board computer (1) Checks and maintenance (1) Engine oil (1)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos