Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery of the Lamborghini Urus

Model: Lamborghini Urus MK 1 - Years 2018-2026
Part: Battery

Today's main instructions will allow you to remove and replace the battery of the Lamborghini Urus in simple steps. First, open the front passenger door and start removing the covering found on the floor; inside you will find the battery, as shown in the video. At this point, disconnect both battery terminals (positive and negative), then remove the central bracket to take it out of its compartment; replace the battery with the new one of the correct type and with the same amperage, then reconnect.

Posted on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery in the Lamborghini Urus
How to Replace the Remote Battery in the Lamborghini Urus
Lamborghini Urus (2018-2026 / MK 1) In today's video, we will see how to replace the exhausted battery in the key for the Lamborghini Urus. You will notice that it is very similar to th…
How to Reset the Oil Light on a Lamborghini Urus
How to Reset the Oil Light on a Lamborghini Urus
Lamborghini Urus (2018-2026 / MK 1) Today, you will learn how to reset the oil light on a Lamborghini Urus. The reset should only be performed after you have changed the oil and the fil…
Engine Oil and Oil Filter Replacement for the Lamborghini Urus
Engine Oil and Oil Filter Replacement for the Lamborghini Urus
Lamborghini Urus (2018-2026 / MK 1) We will briefly outline the useful instructions for performing the routine maintenance service for the engine oil and oil filter change on the Lambor…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos