Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lancia
    3. :
  3. Musa
    4. : Manufacturer emblem

Lancia Musa - Manufacturer emblem

Manufacturer Emblem Lancia Musa (2004-2012 / mk 1)

Lancia Musa (2004-2012 / MK 1)
Replacing the Rear Badge on a Lancia
Heat the old badge, even with a hairdryer. Meanwhile, peel off the badge's adhesive using a plastic spatula or a flat screwdriver (always plastic, of course). …Read all…
Posted on 21 May 2026 by ScegliAuto
Lancia Musa (2004-2012 / MK 1)
Removing the Logo from Lancia Musa
Removing the manufacturer's logo from the Lancia Musa? Here’s how to detach it from the front bonnet. Use a heat gun to warm up the old logo (as shown in the …Read all…
Posted on 10 April 2026 by ScegliAuto
Cigarette lighter (1) Airbag (2) Speaker (1) Car stereo (3) Body (1) Key (1) Checks and maintenance (2) Shifter boot (1) Tail light (2) Air filter (1) Cabin air filter (6) Grille (1) Light bulb (1) Side marker bulb (1) Headlight bulb (5) Power window motor (1) Power window switch (1) Instrument cluster (1) Fuse box (4) Seat (1) Door lock (2) Warning light – error code (3) Service warning light (2) Manufacturer emblem (2) Blower motor (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos