Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Lancia
  4. : Phedra

Lancia Phedra - Videoguide

Lancia Phedra (2002-2010 / MK 1)
How are the roof bars mounted on the Lancia Phedra?

Today we will see the instructions that will allow us to install the roof racks on a Lancia Phedra Van; the assembly procedure is almost similar for all types …read all…
Posted on 4 February 2024 by ScegliAuto
Lancia Phedra (2002-2010 / MK 1)
Reset service warning light Lancia Phedra

Today we will see how to reset the service light for the ordinary maintenance of the oil change of a Lancia Phedra, but also on other car models such as the …read all…
Posted on 11 January 2024 by ScegliAuto
Lancia Phedra (2002-2010 / MK 1)
Lancia Phedra display replacement

Lift the mat located near the instrument panel and open the two side storage compartments. In this way you can remove the plastic cover, the one that was …read all…
Posted on 6 January 2024 by ScegliAuto
Lancia Phedra (2002-2010 / MK 1)
Remove Lancia Phedra car radio

As the video shows, you have to lift the two storage compartments, take out the dashboard housing and lift the anti-noise (or anti-vibration), in this way you …read all…
Posted on 15 November 2023 by ScegliAuto
Lancia Phedra (2002-2010 / MK 1)
Replacement of the car radio in the Lancia Phedra

Replacing the car radio is not a complex operation, it only requires the right tools and a little manual skill, it is useful to have a car radio wiring so that …read all…
Posted on 15 November 2023 by ScegliAuto
Lancia Phedra (2002-2010 / MK 1)
How to automatically open the sliding doors on Lancia Phedra

Let's see in this video how to automatically open the sliding doors (rear) on a Lancia Phedra. Very simple operation to perform, let's see how to proceed: …read all…
Posted on 3 November 2023 by ScegliAuto
Car stereo (2) Roof Rack Bars (1) Checks and maintenance (2) Instrument cluster (1)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos