Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Display Replacement for Lancia Phedra

Model: Lancia Phedra MK 1 - Years 2002-2010
Part: Instrument cluster

Lift the mat located near the instrument cluster and open the two side glove compartments. This will allow you to remove the plastic cover that was hidden by the mat by prising it off from the sides. Remove the air vents by simply pulling them outwards and extracting them from their housing, then remove the ducts located behind them and under the cluster. Unscrew the two screws located beneath the display and disconnect the connectors. Remove the display and begin installing the new display, proceeding in reverse order: connect the connectors, screw the cluster back in, then reassemble the various pieces that were removed.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install Roof Bars on a Lancia Phedra?
How to Install Roof Bars on a Lancia Phedra?
Lancia Phedra (2002-2010 / MK 1) Today, we will look at the instructions that will allow us to install roof bars on a Lancia Phedra Van; the installation procedure is quite similar f…
How to reset the service light on the Lancia Phedra
How to reset the service light on the Lancia Phedra
Lancia Phedra (2002-2010 / MK 1) Today with the help of the following video tutorial we will explain how to reset the service light on a Lancia Phedra vehicle. To reset the light, we…
How to Automatically Open Sliding Doors on a Lancia Phedra
Lancia Phedra (2002-2010 / MK 1) This video shows how to automatically open the sliding doors (rear) on a Lancia Phedra. This operation is very simple; follow these steps: press the …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos