Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing and Replacing a Front Headlamp of a Lancia Lybra

Model: Lancia Lybra MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Headlight

Video tutorial

This video explains how to remove and replace the front headlamp and its bulbs on a Lancia Lybra. The car has a very simple and quick headlamp removal system.

To start, lift the bonnet, reach into the engine bay, and (specifically at the rear of the headlamp) unclip the metal tab that secures the headlamp, then use a screwdriver to undo the few Torx screws. After removing the screws, unclip the headlamp and pull it out from the bumper, disconnect the power connectors, and replace any damaged bulbs or the entire unit.

The reassembly phase is very straightforward: insert the headlamp into the bumper housing as shown in the video, secure the metal tab until the headlamp clicks into place (screw in the securing screws). Finally, test the correct operation of the lights.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

How to replace the rear lights on a Lancia Lybra?
How to replace the rear lights on a Lancia Lybra?
Lancia Lybra (1998-2005 / MK 1) In this tutorial, we will see how to replace the rear lights on the Lancia Lybra, a process that is extremely simple and quick. First, let's make sur…
How to set the clock of the Lancia Lybra
How to set the clock of the Lancia Lybra
Lancia Lybra (1998-2005 / MK 1) Below we will see the main steps that will allow us to set the clock on the central display of the Lancia Lybra. First of all, we get on board the ca…
How to Replace the Front Door Speaker on a Lancia Lybra
How to Replace the Front Door Speaker on a Lancia Lybra
Lancia Lybra (1998-2005 / MK 1) Before starting, open the front door of your Lancia Lybra. Begin by prising off the speaker cover using a flathead screwdriver. Next, unscrew and rem…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos