Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear lights on a Lancia Lybra?

Model: Lancia Lybra MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Tail light

Video tutorial

In this tutorial, we will see how to replace the rear lights on the Lancia Lybra, a process that is extremely simple and quick. First, let's make sure that the instrument panel is turned off to operate safely.

Then, we open the trunk lid and remove the panel located at the back of the light in question. Next, we remove the plastic cover by unscrewing the corresponding nut, unscrew the three nuts located around the perimeter of the headlight, and disconnect the power connector.

At this point, all that’s left to do is separate the headlight from the body and install the replacement by following the reverse procedure.


Posted on 6 December 2025 by ScegliAuto


Related tutorials

Where are the fuses located in the Lancia Lybra?
Where are the fuses located in the Lancia Lybra?
Lancia Lybra (1998-2005 / MK 1) The fuses of the Lancia Lybra are contained within two fuse boxes installed in the vehicle: in this model, you can find two boxes. The first is locat…
What is the fuse diagram for the Lancia Lybra?
What is the fuse diagram for the Lancia Lybra?
Lancia Lybra (1998-2005 / MK 1) In this video, you can see where the fuse boxes are located in the Lancia Lybra and their respective diagrams, to consult in case you need to check t…
How to Replace the Number Plate Bulb on a Lancia Lybra
How to Replace the Number Plate Bulb on a Lancia Lybra
Lancia Lybra (1998-2005 / MK 1) To replace the number plate bulb on a Lancia Lybra, loosen the two screws located at the top and bottom of the light unit, positioned on the left sid…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos